Baghouse Dust Collectors

Filters for wood, paper, chemicals, minerals and more

Nederman MikroPul's range of baghouse dust collectors are suitable for various types of dusts such as wood waste, saw dust, chemical, mineral, combustible dust and more.

The airflow through bag filters can be from the outside to the inside of the filter (the particles separated accumulate on the outside of the bag) or the other way around, depending on the application. The particles are normally captured on the internal surface of the bag filter.

Bag filters are designed to be cleaned when they are clogged not replaced. Baghouse dust collectors are normally cleaned by manually cleaning, mechanical shaking, reverse air, or by air pulse.

Baghouse Dust Collectors

Flat Bag Filter Dust Collector

The FS series dust collector with horizontally installed flat bag filters is a compact and efficient filter system with intelligent air cleaning technology. This system is ideal for high dust loads of finer dust particles and high gas temperatures.

Pulse Jet Collectors

Pulse jet baghouse dust collectors are used when it is impractical to shut down your dust collector to clean the bags. A pulse of compressed air is blasted through the bags to blow loose the built up particles on the bags to maintain optimum filtration efficiency.

Reverse Air Baghouse Dust Collectors

The key to the RAF’s high reliabilityand performance is its simple,effective cleaning system. Bags are cleaned by high volume, low pressure reverse air every two minutes.

Additive dosing

The addition of the adsorbent takes place on the pneumatic way. The hydrated lime is taken out of a silo through a slide gate, a rotary valve and a screw conveyor. In an intermediate vessel the adsorbent will be weighted and blown into the ductwork. The dosing quantity can be adjusted by a frequency drive so that the necessary amount of adsorbent can be adapted.